8
BEFORE FIRST USE
Before using your Cuisinart Precision Pro for the first time, remove any packaging materials
and promotional labels.
Wash the Cuisinart mixing bowl, Chef’s whisk, flat mixing paddle and dough hook in warm
soapy water with a soft cloth. Rinse and dry thoroughly.
ASSEMBLY INSTRUCTIONS
1. Raise Mixer Head –
Push down the head-lift release lever and raise the stand mixer
head until it locks into place.
2. Attach Mixing Accessory –
Place flat mixing paddle, chef’s whisk, or dough hook
into the accessory port. Push up and turn counterclockwise until it locks. Push up and
turn clockwise to remove.
3. Place Mixing Bowl –
Turn clockwise to lock in place.
4. Lower Mixer Head –
Holding the stand mixer head, push down the head-lift lever
again and fully lower the mixer head.
5. Attach Splash Guard with Pour Spout –
After attaching the accessory and lowering
the stand mixer head, slide the splash guard onto the bowl. Attach the pour spout by
placing it into the tabs on the splash guard ring and slide it into place. The splash guard
ring can rotate in any direction to more easily add ingredients.
To remove:
Remove the pour spout from the splash guard and slide splash guard off
the bowl.
OPERATION
NOTE:
Always begin mixing at low speed to prevent splattering. Once the ingredients are
combined, increase to required speed.
LIGHT RING
3 colors for different modes:
a. STANDBY – White, with Cuisinart name illuminated on the dial
b. RUNNING – Blue, unit is running with selected mode illuminated on the dial
c. STOP/RESUME – Red, flashing with either Stop or Resume illuminated on the dial
TO TURN STAND MIXER ON
1. Plug in the stand mixer.
2. To secure mixing bowl on base, turn clockwise.
3. “Cuisinart” will appear.
4. Rotate the dial to choose from the following menu options:
• MANUAL (Normal Operation)
• TIMER (Normal Operation with a Countdown Timer)
• DOUGH (Recipe Task)
• MIXING (Recipe Task)
• WHISKING (Recipe Task)
5. Select preset program by pressing the dial.
6. Program will begin.
