Cuisinart GR-5 Series, Инструкция и книга рецептов

Страница: 8 / 28

Hinge release lever
Lower
plate
release
button
Upper
plate
release
button
8
bottom. When you lift the handle to open
the Griddler
®
Five after cooking, the cover
will remain floating. In order to lock the
cover back into the upright position, you
must close the Griddler
®
Five, without any
food in place, and open it again.
Flat Position – Upper plate/cover is level
with lower plate/base. The upper and
lower plates
line up to
create one
large cooking
surface. The
Griddler
®
Five
is in this
position when it is used as a Full Grill, Full
Griddle, or Half Grill/Half Griddle.
To adjust the Griddler
®
Five to this
position, locate the hinge release lever on
the right arm.
With your left hand on the handle, use
your right hand to slide the lever toward
you. Push the handle back until the cover
rests flat on the counter. To change
position, lift the handle and cover to
return it to the closed position.
If the Griddler
®
Five is already in the open
position and you wish to adjust it to the
flat position, pull the handle slightly
toward you and then lift the hinge release
lever. Push the handle back until the cover
rests in the flat position. Pulling the
handle forward slightly before lifting the
hinge release lever will take some of the
pressure off of the hinge and you will be
able to adjust the Griddler
®
Five more
easily.
To insert
cooking
plates
Adjust the
Griddler
®
Five
to the flat
position with the control panel directly in
front of you. Insert one plate at a time.
Each plate is designed to fit in either the
upper housing or the lower housing of the
Griddler
®
Five.
If you are facing the Griddler
®
Five, the
drip spout should be at the rear of the
plate. Locate the metal brackets at the
center of the housing. Tilt the back end of
the plate and line up the cutouts at the
back of the plate with the metal brackets.
Slide the plate underneath the brackets
and push down the front end of the plate.
It will snap into place. Turn the Griddler
®
Five around and
insert the
second plate on
either its grill or
griddle side into
the upper
housing as you
did with the first
plate.
To remove cooking plates
Once the Griddler
®
Five is cooled, adjust
to flat position. Locate the plate release
button on one side of the unit. Press
firmly on button and the plate will pop up
slightly from the
base. Grasp the
plate with two
hands, slide it
out from under
the metal
brackets, and
lift it out of the
base. Press on the other plate release
button to remove the other cooking plate
in the same manner.
To position drip tray
One side of the base has a slot provided
for the drip tray. Slide the drip tray into
the base according to the instruction on
the tray.
Grease from the
food will run off
the plates
through the drip
spout and into
the drip tray.
Slowly remove
the drip tray.
Grease should be safely disposed of after
the Griddler
®
Five has cooled down
completely. The drip tray can be cleaned
in the dishwasher.