IMPORTANT
UNPACKING
INSTRUCTIONS
This package contains a Cuisinart
®
Premier
Series 7-Cup Food Processor, and the
standard parts for it:
Work bowl, work bowl cover, large and small
pushers, dough blade, metal chopping/mix-
ing blade, slicing disc, shredding disc,
detachable disc stem for discs, how-to DVD
and recipe/instruction book.
CAUTION: THE CUTTING TOOLS HAVE
VERY SHARP EDGES.
To avoid injury when
unpacking the parts, please follow these
instructions.
1.
Place the box on a low table or on the
fl oor next to the kitchen counter or
table where you intend to keep the food
processor. Be sure the box is right side
up.
2. Remove the cardboard insert. You will
see a rectangular block of plastic foam
that holds the processor parts, each
fi tted into a cavity in the foam.
3. The Detachable Disc Stem for the discs
(A) sits in a cavity in one corner of the
foam block. Remove this fi rst.
4. The Pusher Assembly, with large and
small pushers, (B) sits in the adjacent
cavity. Remove this next.
5.
The Dough Blade (C) rests in a cavity
on the opposite side of the foam block.
Remove it from the foam.
6. The Slicing Disc (D) is on the edge of one
of the long sides of the foam block; the
Shredding Disc (E) is on the other side.
WITH GREAT CARE; THE BLADES
ARE VERY SHARP.
7.
Lift out the DVD from its space on the
foam block.
8. Lift out the foam block.
9. Remove the instruction/recipe book.
10. The housing base with work bowl, metal
blade and cover are at the bottom of
the box. The metal blade is loose in the
work bowl beneath a foam insert. Do not
reach into feed tube. Do not turn over
work bowl without fi rst removing metal
blade. Remove work bowl cover by
turning it clockwise and lifting.
11. Remove the base and bowl together by
grasping the plastic bowl at the top with
both hands and lifting the bowl straight
up. Do not rotate the bowl clockwise
on the base. This will cause the bowl to
separate from the base.
12. Place the food processor on the counter
or table. Remove foam cylinder insert
from top of metal chopping blade. Read
the instructions thoroughly before using
the machine.
13. Save the shipping cartons and plastic
foam blocks. You will fi nd them very
useful if you need to repack the
processor for moving or other shipment.
Please watch the enclosed how-to DVD
before using the food processor.
WHEN REMOVING BLADE:
CAREFULLY REMOVE THE METAL BLADE
BY GRASPING THE CENTRE WHITE HUB
AND LIFTING IT STRAIGHT UP. NEVER
TOUCH THE BLADES, AS THEY ARE
RAZOR SHARP.
3
