2
CAPACITY CHART
Recommended work bowl capacity for various foods
FOODS
CAPACITY
Chopped and Puréed Fruit
and Vegetables
3 cups (750 ml)
Chopped or Puréed Meat, Poultry,
Fish or Seafood
2
¼
pounds (1.03 kg)
Bread Dough
2½ pounds [1.13 kg (5 cups) flour, yielding
two 1
¼
pound loaves (625 g)]
Nuts for Nut Butters
3 cups (750 ml)
Sliced or Shredded Fruit,
Cheese, or Vegetables
14 cups (3.31 L)
Cake Batter
4 pounds (1.8 kg) [(five 8-inch layers) 20 cm]
Cookie Dough
3½ pounds [136 kg (90 cookies)]
IMPORTANT
UNPACKING
INSTRUCTIONS
This packing contains a Cuisinart
®
Food Processor, and these standard
parts for it: metal chopping blade,
slicing disc and shredding disc,
detachable stem for discs and
spatula.
CAUTION: THE CUTTING TOOLS
HAVE VERY SHARP EDGES. To
avoid injury when unpacking the
parts, please follow these i
nstructions:
1. Place the box on a low table or
on the floor next to the kitchen
counter or table where you plan
to keep the food processor. Be
sure the box is right-side up.
2. Remove the cardboard panel
and the instruction material with
plastic spatula.
3. You will see a rectangular block
of plastic foam that holds the
processor parts each fitted into
a cavity in the foam.
4. The detachable stem (A) for the
discs is in a cavity at one
short side of the foam block.
Remove it first.
5. The slicing disc (B) is on one
long side and the shredding
disc (C) on the other. Slide
them out of their grooves WITH
GREAT CARE; THE BLADES
ARE SHARP.
6. Now only the work bowl cover
(D) and the pusher assembly (E)
remain in the foam block. Grasp
the edge of the work bowl cover
and lift it straight up. Lift the
pusher assembly straight up by
following.
7. Lift out the foam block.
8. The machine base and work
bowl with metal
blade are at the
bottom of the box.
CAREFULLY
REMOVE THE
METAL BLADE BY
GRASPING THE
CENTER WHITE
HUB AND LIFTING
IT STRAIGHT UP.
NEVER TOUCH
THE BLADES,
WHICH ARE
RAZOR SHARP.
9. Lift the bowl straight up.
10. You will see the machine base
remain at the bottom of the box.
Remove the base by grasping
the base housing with both
hands and lifting it straight up.
Place the base on a counter or
table and read the instructions
thoroughly before using the
machine.
11. Save the shipping cartons and
plastic foam blocks. You may
want to use them in shipping
the processor at a later date.
Work bowl cover (D)
Pusher
assembly
(E)
Slicing
disc (B)
Shredding
disc (C)
Detachable
stem (A)
