3. Lift the wine opener up and away
from the bottle. To eject the cork,
press the EJECT switch. The spiral
will turn in a clockwise direction and
release the cork from the wine opener
(see Fig. 4).
4. Always return the wine opener to the
charging base when done. This will
protect the unit while not in use.
CLEANING AND
MAINTENANCE
Always unplug the appliance from the
electrical outlet before cleaning.
Make sure all the parts are clean and dry
before storing.
To clean housing, wipe with a clean,
damp cloth.
Never immerse power adapter, charging
base or housing in water or any other
liquids.
Never submerge the motor base in water or
other liquids, or place
in a dishwasher.
Any other servicing should be performed by
an authorized service representative.
AFTER USE
We recommend that you return your
appliance to the charging base so that it is
fully charged and available for use
at any time.
OPERATING
INSTRUCTIONS
Connection and Use
This appliance is for 120 volts only and
should not be used with a converter.
We recommend that you charge your
electric wine opener for at least 12
hours before using for the first time.
Please follow the instructions for
charging as stated below:
Charging Your Electric
Wine Opener
Plug one end of the power adapter
into the back of the charging base and
the other end into an electrical outlet.
Place the electric wine opener into
the charging base, making sure that it
is firmly in position and that it is fully
engaged with the charging connection.
The blue indicator light will illuminate.
It will take approximately 12 hours to
charge your electric wine opener. The
charging light will remain blue during
the charging process, even when fully
charged.
Your wine opener can open
approximately 50 bottles of wine on a
full charge.
Foil Cutter
For your convenience, this unit has a foil
cutter, which can be stored in the base
of the unit. Before removing the cork,
you must remove foil to expose top part
of cork surface (see Fig. 1). Attach foil
cutter to the top of the wine bottle. Keep
hand on lower part of bottle and turn foil
cutter in twisting motion to remove foil.
Remove foil to expose top part of cork
surface.
CAUTION:
Blade on foil cutter is sharp.
Please keep fingers away from cutter’s
sharp edges.
To Operate Your Electric
Wine Opener
Press the REMOVE switch to remove
the cork from the bottle. After the cork
has been removed from the bottle,
press the EJECT switch to release the
cork from the wine opener (see Fig. 2).
1. Place the wine opener on top
of the wine bottle, making sure
that it remains as straight/upright
as possible at all times. If you
hold the electric wine opener at
an angle to the bottle it will not
remove the cork properly.
2. Hold the wine opener and bottle
firmly. Press the REMOVE switch.
The corkscrew spiral will turn
in a counterclockwise direction
and enter the cork, gradually
removing it from the bottle. When
the mechanism stops, the cork
has been fully removed from the
bottle (see Fig. 3).
(Fig. 2)
(Fig. 3)
(Fig. 4)
(Fig. 1)
4
5
