16
ASSEMBLY INSTRUCTIONS
13.
a. Remove the Electronic Ignition Battery Cap
(CF2) and the plastic nut from the Electronic
Ignition Assembly (CF1).
b. Feed the Electronic Ignition Assembly (CF1)
through the opening in the Right Cart Side
Panel (EA) and secure using the nut.
c. Insert one “AA” battery into the battery
compartment with the positive end facing
outward, as shown. Secure using the
Electronic Ignition Battery Cap (CF2).
TIP:
The Electrode Set, Main Burner (CG), the
Electrode Wire, Infrared Zone (DE), and
the Electrode Wire, Rotisserie Burner (BH)
can be found attached to the Control
Panel (CJ) heat shield, as shown.
d. Insert the three Electrode Set, Main Burner
wires (CG) into the Electronic Ignition
Assembly (CF1), as shown in figure D.
NOTE:
All main burner, Infrared Zone side
burner and rotisserie burner electrode
wire connection points are the same
size.
C
CG
CF1
D
CJ
EA
EA
CF2
CF2
-
+
CF1
A
B
