17
Back view
A
Close up
CM
CN
a. Position the Heat Shield (CN) into the two
hooks located on the bottom of the Upper
Back Panel (CM), as shown in figure A.
CM
CN
ASSEMBLY INSTRUCTIONS
14.
13.
e. Insert the Electrode Wire, Infrared Zone (DE)
and the Electrode Wire, Rotisserie Burner
(BH) into the Electronic Ignition Assembly
(CF1), as shown in figure E.
f. Insert the two Electronic Ignition Button (DK)
wires into the Electronic Ignition Assembly
(CF1), as shown in figure F.
CG
DE
DK
DK
BH
CF1
F
CG
DE
BH
CF1
E
