CUES QT901, Руководство пользователя

Страница: 22 / 28

CUES, INC.
800.327.7791 | salesinfo@cuesinc.com | www.cuesinc.com
18
QZ3 TRIPOD/BIPOD
•
The optional QZ3 tripod/bipod is made to be a 2-in-1 accessory. One leg on the assembly is removable
using the repositionable locking handle.
•
To avoid losing the handle we recommend reinstalling into the base after removal of the third tripod leg.
• For pipeline inspections we recommend the bipod configuration, using the depth rod on the pole as the
third leg.
•
To suspend the pole, first collapse all three legs of the tripod so that the weight of the assembly rests
on the unextended legs. The assembly is NOT meant to carry full weight of the pole while legs are
extended.
• When the tripod is not being used for stabilization, the Pole Stand-in accessory can be fitted in place
of the pole and the Pole Mount Tablet Holder can be fit onto the Stand-in to hold the tablet on the
tripod.
Adjustments -
• Slipping
• Turn button at top of leg clockwise to increase locking
•
Sticking
• Turn button at top of leg counter-clockwise to decrease locking
• Inspect for damage on outside of leg
• Do NOT lubricate legs. This may cause excessive slipping.
Pole Mount Tablet Holder -
•
Spread cross arms of holder to fit tablet (horizontally) into the holder. Secure with rubber straps over
the corners of the tablet.
• The pole mount tablet holder clamps to the largest section of the telescopic deployment pole.
• For a tighter fit, open the clamp handle and rotate the handle clockwise by one rotation and re-
clamp. Repeat as necessary.
•
To mount the tablet on a tripod not being used for inspections use the Pole Stand-in to hold the tablet
independent of the pole.
Harness Mount Tablet Holder -
•
Attach the tablet mount to the harness with the thumb screw on the harness. Adjust harness straps
to fit user. Place tablet (horizontally) between the clamping surfaces and secure with the two thumb
screws at the top of the holder.
• The tablet can be tilted by adjusting a thumb screw at the base of the harness.
WiFi Repeater Accessory -
•
Coming Soon
• WiFi Repeater will mount at the top of the QZ3 pole to increase the range of the system from the
manhole.