User Manual Wireless IR Control Panels
www.cuesystem.com
Page 17 of 26
8.
Troubleshooting
1. The Brightness of LEDs is Visibly Decreasing.
•
Charge the accumulator immediately.
2. When pressing the button the LEDs are going on and off immediately and then back-light
button flashes several times.
•
The accumulator is totally discharged.
•
When waking up from the sleep mode it tries to light on the LEDs.
•
The increased consumption causes a drop of voltage, which then resets the
microprocessor.
•
Charge the accumulator immediately.
3. The IR operating range is short.
•
Check the accumulators in the panel and recharge them.
•
Change position of the panel or receiver.