User Manual airCUE-8X10, airCUE-6X10
www.cuesystem.com
Page 11 of 28
5.3.
Rear Panel
Factory Default Button
10/100 BaseT LAN incl. PoE
Connector
Power Supply Connector
2x Wall Docking Station Fixing
4x Thread M3 for Accessories
2x M3 for Tabletop Stand Fixing
10/100 BaseT LAN Link / Activity
Indicator
Power Supply Connector
This connector allows you to connect airCUE to the external power with the supplied AC adapter. It is used
for charging of the battery without docking station.
10/100 BaseT LAN incl. PoE Connector
The 10/100 BaseT LAN is a standard network connection 10/100 BaseT LAN using RJ-45 connector. There
is no auto sense, which means it does not recognize straight through cable to cross-over cable. For the
direct PC connection it is necessary to use cross-over cable; for the connection to Ethernet switch straight
through cable. The length of the Ethernet cable connecting touch panel to the network must not exceed 100
meters.
Power over Ethernet (PoE) is fully compatible with IEEE 802.3a standard. PoE integrates data and power on
the same wires. It keeps the structured cabling safe and does not interfere with concurrent network
operation. PoE delivers 48 V of DC power over unshielded twisted-pair wiring for terminals consuming less
than 13 watts of power.
PoE needs 802.3a compatible Ethernet switches currently available by most
leading network equipment vendors.
Connector pin out
Pin
1
2
3
4
Signal
TX_D1+ and PoE
TX_D1- and PoE
RX_D2+ and PoE
5
6
7
8
RX-D2- and PoE
PoE +/- 48 V
Cat5 Cable Color
White / Orange
Orange
White / Green
Blue
White / Blue
Green
White / Brown
Brown
RJ-45
1
8
CUEnet (LAN)
PoE Common
