17
NAMES AND FUNCTIONS ON CONTROL PANEL / MALFUNCTION INSPECTION OF DISPLAY PANEL
H
O
W
T
O
C
L
E
A
N
/
C
O
N
T
R
O
L
&
D
IS
P
L
A
Y
P
A
N
E
L
※
When the product is plugged in and no operation is being conducted. the product is in
Standby Mode. The in screen image showing on the right indicates Standby mode.
(The options of the Standby mode display and presence of the voice are different according
to user setting.)
※
When operating functions, press the CANCEL button to enter the Standby mode.
※
Press the button until you hear the buzzer sound. The design of the plate may differ in reality.
START button
Used to start cooking
JOG DIAL
· 메뉴를 변경할 경우
· 사용자 모드 메뉴를 변경할 경우
· 예약시간, 요리시간, 요리온도 등을
변경할 경우
CANCEL button
Used to cancel a selected
function or to automatically
discharge steam(Press and hold
the button for two seconds to
cancel during cooking.)
SELECT / MODE button
· 선택한 기능을 설정 할 경우.
·
Used to enter user mode.(Press and hold the button for two seconds)
<Standby Mode>
This appears when the Inner Pot is not mounted.
This indicates that the Temperature Sensor is malfunctioning.
Contact our customer service center.
This appears when you press the COOK or PRESET button without completely turning the Cover Handle.
Completely turn the Cover Handle to “
” (Lock).
For any incorrect use or when the product is not properly working, the Display Panel will display the below
signs to alert you. If a sign keeps showing even in normal conditions or after proper action has been taken,
please contact our customer service center.
Error Inspection Function of Display Panel
This appears when the Cover Handle is not turned to “
” (Open) in the Keep Warm mode after cooking is done
and you press the COOK or the PRESET button again after entering into Standby mode. This function is to check the
operation of the Cover Fastening Sensor. Turn the Cover Handle to “
” (Open) and then turn it to “
” (Lock). If
the problem persists, contact our customer service center.
This indicates that there is an error with the external
memory of MICOM. Contact our customer service center.
This appears when you boil only water continuously or
there is a malfunction with the product.
Contact our customer service center.
This indicates that the Environmental Sensor fails
to work. Contact our customer service center.
This indicates that there is an error with the internal
memory of MICOM. Contact our customer service center.
※
Pictures may look different from the actual product
