HOW TO CLEAN
16
How to use the handle
•
If the lamp does not turn on, it would
not operate the “Cook” and “Preset”
buttons. Make sure the handle is
located in “Lock”.
2. To close the top cover turn the
handle to unlock shown in the
picture on the right. (Make sure
to turn the handle to "unlock".)
1. Make sure the inner pot is
place correctly inside the main
body.
3. If there is excess steam inside the
inner pot, it may be difficult to lock the
handle. Cautiously pull up the pressure
weight and allow the excess steam to
release. Then try to turn the handle
again.
When top cover does not close perfectly
Do not try to close the top cover by force. It may damage your cooker and cause problems.
1. After cooking, turn the handle from “Lock” to “Unlock” to open
2. If there is unreleased steam in the Inner pot it maybe difficult to
turn the handle. In this case, twist (cautiously pull up) the
pressure weight and let the excess steam out. (See more detail
of the pressure weight on page 11.) Do not open by force.
3. Handle must be turned to “Unlock” to open and close the lid.
※
Pictures may look different from the actual product
How to clean the soft steam cap
※
Do not touch the surface of the soft steam cap right after cooking. You can get burned.
❶
Peel off the soft steam cap as
shown in the image above by
grasping the dented part with
your fingers and pulling to the
side while lifting gently.
❺
When you are putting the
soft steam cap together, match
the bump on the bottom, press
it towards the arrow and
make sure the hook in the
front is locked.
❻
When installing the soft
steam cap, insert the cap
firmly by pressing it in the
direction as shown above.
Correct
올바른 패킹사용 예
Wrong
※
Carefully insert the packing the correct way.
❷
Disassemble soft steam cap
in the rear by pressing in the
direction of arrow and ash it
frequently with an neutral
detergent of sponge.
❸
Disassemble the rubber
packing in the direction of
the arrow.
❹
When fitting the rubber
packing into the plate, please
make sure the packing is
facing the correct direction.
How to check if your packing has installed properly
