
11
ww
w.c
uc
ko
o.c
om
.m
y
M
A
N
U
A
L
Installation Guidelines
•
Attach the foam tape to the specified area before installing the product.
•
When you attach foam tape, finish the work by preventing the ends from
overlapping.
※
Without the proper installation of the foam tape, liquid may seep into the circuit
board causing a malfunction to occur.
Cautions for Installation
•
Place the stand ( 8.7cm) on an even surface and put the product on top of it as shown in the picture below.
•
The stand cannot be used for built-in installation
※
When installing stand, please keep out of reach of children.
- Failure to do so may result in burns.
Installing Stand Case
Attaching Foam Tape
•
A power outlet exclusively for 220V with at least a rating of 16A must be used for this product.
•
Any electrical work needed on the product must be done by a certified electrician or agency.
•
Do not use with other electrical appliances on a single power outlet.
•
Do not install the product on a low heat-resistant surface such as a plastic floor as the temperature on bottom of the product gets pretty
high when used for long.
•
If you need an extension cord, please use one with a rating of at least 16A.
•
Built-in installation must be done only by a technician certified by us. Please contact the customer service for built-in installation.
Содержание CIHR-A20 Series
Страница 36: ...36 MEMO...
Страница 37: ...37 www cuckoo com my MEMO...