imp
o
rT
an
T
safe
gu
a
rd
s
C
a
uTi
ons
befo
r
e
i
ns
T
alla
Ti
on
4
READ ALL INSTRUCTIONS BEFORE USING
DANGER :
To reduce the risk of electric shock :
1. Do not place or store this appliance in a location where it can fall or be pulled into a tub or sink.
2. Do not place in, or drop into water or other liquids.
3. Do not touch a product that has fallen into water. Unplug immediately.
WARNING :
To reduce the risk of burns, electric shock, fre or injury.
1. Close supervision is necessary when this appliance is used by or is near infants, elders, or
handicapped persons.
Children should not be permitted to use or touch this appliance without adult supervision.
Be sure to adjust the toilet seat's temperature for elders, handicapped persons, or people with
sensitive skin.
2. Use this appliance only for its intended purpose as described in this manual.
Do not use attachments not recommended by the manufacturer.
3. Do not operate this appliance if the cord is damaged or if the product is dropped into water.
4. Install the unit properly by following the installation procedure.
5. Only authorized persons can install or repair the unit. Do not attempt to service this appliance by
yourself. Doing so could void the warranty.
6. Keep the cord away from heated surfaces.
7. Never drop or insert any objects into any opening or hose.
8. Do not use outdoors. Do not use aerosol or oxygen spray products on the unit.
9. Always follow the grounding instructions in this manual before plugging in the unit.
SAVE THESE INSTRUCTIONS
NOTE THE FOLLOWING IMPORTANT POINTS
1. Do not install in a location where water might be splashed on this appliance or in a location
exposed to excessive moisture where condensation might form on the product's surface.
2. To avoid damage to electronic components due to high levels or humidity, provide adequate
ventilation by opening a window and/or door when bathing.
3. Water supply should have a water pressure of 0.1~0.74MPa(1~7.4bar).
4. Connect the product to a pipe carrying potable water. Do not connect to an industrial water line
or other water supplies that are not potable.
5. Cool the unit in the room before installation.
6. The thermal protector in the water tank may malfunction when transporting or storing warm water.
7. The rated power voltage is 120V AC, 60Hz.
8. Do not plug the unit in until installation is complete. It may result in malfunction.
