h
o
W T
o
i
ns
T
all
Th
e
pr
o
duCT
12
• Please use the product only with a Power Outlet exclusively for 120V with at least a rating of
15A and when properly grounded
• Do not make connect Power before installation.
Installation Order
Separate water supply hose
▶
Turn the water supply valve clockwise to lock, and separate
the toilet hose using a spanner.
1
Remove the existing toilet seat
▶
Unfasten the nut and remove the toilet seat.
▶
Save the old toilet lid and nuts for reinstallation later.
2
Connect T-valve
▶
Install T-valve as shown
3
1. Allign the catch plate groove with the toilet
seat hole.
2. Insert the Anchored screws into the catch
plate and toilet seat hole.
3. Fasten the catch plate to the toilet by
tightening the Anchored screws with
Anchored rubbers, Anchored washers and
Anchored nuts.
▶
Only 140mm toilet mounting hole spacing is
available.
4
Connect the Water supply hose to the side of
Electronic Toilet Seat.
5
1. Insert the Electronic Toilet Seat body into
the groove on the installed catch plate.
2. Connect T-valve and Water supply hose.
6
Warnings
Water Supply Valve
Toilet hose
Thread from tank
Anchored screws
Anchored rubbers
Anchored washers
Anchored nuts
Catch plate
Catch plate
Installation Hole
Bidet Body
Anchored rubbers
Anchored washers
Anchored nuts
Electronic Toilet Seat body
anchored Hook
Toilet hose
Bidet hose
Water Supply Valve
