Cuchen BT10 Series, Руководство пользователя

Страница: 13 / 64

13
Operating Instructions
Cleaning the Pressure Nozzle
Cleaning the Steam Cap
Pressure Cap/
Pressure Regulation
Nozzle
Steam Vent
Steam Cap
If water has collected here,
soak it up using a dry kitchen
towel.
Use the AUTO CLEAN feature to remove and clean debris and buildup from the steam vent. (See p.24.)
※
These parts become very hot. Do not touch them right after cooking.
※
The steam cap becomes very hot. Do not touch it right after cooking.
You may get burned. Take extra caution.
If the pressure regulation nozzle’s
packing is out of place as shown in
the figure on the left, steam will be
allowed to seep through. Ensure
that the packing is properly seated
in place.
Detach the steam
cap as shown in the
figure on the right.
To reassemble the
steam cap, fit into
the grooves of
①
and push down in
the directions of the
arrows until the two
parts are securely
attached.
As shown in the
figures on the right,
press the directions
of
②
and
③
from
the spots marked
by the arrows while
securing
①
. Then,
detach the steam
cap at the direction
of
④
.
To reinstall the
steam cap to the
cooker, seat the
steam cap on the
lid and press down
the steam cap at
the direction of the
arrow with hands
until securely set in
place.
BT1000iD_ENG.indd 13 2012-09-18 �� 9:42:03