Part: CubeSense V3
Doc: User Manual
Ver:
1.11
Page: 19
maximum X and Y pixel values. These two coordinates define the masking square. Take great
care to ensure correct placement of these masking squares. Testing should also be performed
to verify correct masking. See the Node Definition for correct telemetry and telecommands to
perform masking.
Figure 7
–
Object masking
When the CubeSense is used with the within a CubeADCS running CubeACP, the image will
first need to be transformed before reading the pixel coordinates. This is done by opening the
image in
Microsoft Paint
, rotating the image 180°, flipping the image horizontally and then,
reading the minimum X and Y pixel values at the top-left and the maximum X and Y at the
bottom-right. These steps are shown in the figure below.
