Part: CubeSense V3
Doc: User Manual
Ver:
1.11
Page: 11
5 = SRAM overcurrent
5
1
Detection
result
Unsigned
8-bit
0 = start-up
1 = no detection scheduled
2 = detection pending
3 = Nadir error
–
too many
detected edges
4 = Nadir error
–
not enough
detected edges
5 = Nadir error
–
Bad fit
6 = Sun error
–
Sun not found
7 = Successful detection
The first step after reading this TLM is to check the detection and capture-results. The
description of each result is detailed in the table above.
Only when the capture result is
“
Successful
ly captured” and the detection result is “Successful detection” should the
result in bytes 0-3 be used as valid detection results.
