Cube AERIUM C:68/TT, Общее руководство

Страница: 40 / 42

| 19 18 |
AERIUM AERIUM
13.2 Attachment of hydration system
13.2.1 Removal of hydration system
To remove the hydration box, it must
be pulled away from the adapter plate,
upwards in the direction of the cockpit.
Some effort may be required due to the
magnetic force involved.
13.2.2 Attachment and removal of
cover
For correct fixation, first place the cover
with the back edge on the hydration box.
Then tilt the cover from the back to the
front and onto the bottle, and press it hard.
To remove the cover, grasp it by the groove
on the front edge of the bottle and pull it
upwards.
13.2.3 Cleaning the hydration system
All the components of the hydration sys-
tem are dishwasher-proof up to 50°C and
can be simply cleaned in the dishwasher.
It is of course possible to rinse it with soap
and warm water. Be careful not to use
harsh scouring agents or rinsing sponges,
so as to avoid any permanent clouding of
the bottle.
Risk of personal injury and material
damage!
Before every ride, check that the storage
and hydration box is correctly installed.
Clean your hydration system on a
regular basis, in order to avoid drinking
water residues accumulating.
14 Warranty /
Guarantee / CCR
14.1 Warranty and voluntary guarantee
In principle, we grant a statutory warranty
on all products, i.e. 2 years from the date
of purchase. In addition, we offer added
service with respect to frame breakages,
which goes beyond the statutory warranty,
as follows.
Carbon frames and forks: 3 years' voluntary
manufacturer's guarantee
This voluntary manufacturer's guarantee is
granted for the above- mentioned period
from the date of purchase, provided that
your CUBE bike was bought from an official
CUBE dealer. This guarantee is valid only for
the initial purchaser of the bike. If the prod-
uct is transferred from the first purchaser to
another person, the voluntary manufactur-
er's guarantee becomes obsolete.
This guarantee applies exclusively to the
frame. The cost of any mounted parts addi-
tionally required due to technical modifica-
tions to the frame or fork models over the
years are to be borne by the customer.
14.2 CUBE CRASH REPLACEMENT (CCR)
Risk of personal injury and material
damage!
This exchange service is designed to
provide you with an uncomplicated
and cost-effective exchange following
a crash, where this results in obvious
damage to carbon frames and forks, or
where damage to them cannot be ruled
out. This benefit can be utilised at any
time within the three-year voluntary
manufacturer's guarantee.
Your point of contact for claims arising
from the statutory warranty or from our
voluntary manufacturer's guarantee, or
from our CCR, will always be the CUBE
dealer which from whom you purchased
the product.