Cub CB-425e, Руководство пользователя

Страница: 31 / 38

Self-test
Printer will print the printer configuration label after gap/black mark sensor calibration.
The
Self-test printout can be used to check if there is any dot damage on the heater
element, view printer configuration and available memory space.
Print head test pattern
Printer model name & Main board firmware version
Printed mileage
Main board firmware checksum
Serial port setting
Code page
Country code
Print speed
Print darkness
Label size (width, height)
Gap size (vertical gap, offset)
Sensor sensitivity
File management information
„
Dump mode
p mode after printing printer configuration. In the dump mode, all
l value
Printer will enter dum
characters will be printed in 2 columns as following. The left side characters are
received from your system and right side data are the corresponding hexadecima
of the characters. It allows users or engineers to verify and debug the program.
25
Hex decimal data related to
left column of ASCII data
ASCII Data