Cub Cadet LH5 H60, Руководство пользователя, Страница: 24 / 159

24
Servicing
EN
Cutting tips
-Please remember the breeding season of birds!
-The ideal shape for hedge cutting is trapezoidal,
which allows enough light and air to reach all parts
of the hedge.
-To promote thick growth in young hedges new
shoots should only be shortened by half.
-If the hedge has already reached your desired
height, now shoots can be completely removed.
-To obtain a uniform hedge height, you can tension
a guide line at the desired height and then cut
along this line.
Cutting times
Deciduous hedges May/June and October (per-
form pruning by about 1/3 of
the total height in winter)
Evergreen hedges April and October
Conifers April and October
Switching the device off
D
Î
To switch the device off, release the on/off
switch [A] or the on-off switch on the bow-shaped
handle completely [C] .
3
The device is switched off and the cutting blade
comes to a stop after a short while.
Note
The lockout button automatically returns to
its initial position when you release the on/off
switch. After use, slide the protective cover
onto the cutting blade.
Removing the power pack
B
Î
Press the power pack release [B]
2
.
Î
Remove the power pack [C]
3
.
Servicing
WARNING!
Risk of injuries or material damage.
¾
Only clean or service the device when
the motor and the cutting tool are both
stationary.
¾
Always remove the power pack prior to
working on the device.
¾
Repair and service work as well as the
replacement of safety elements must
be performed by a qualified expert or
workshop.
Cleaning
Î
Clean the hedge trimmer after every use, espe-
cially the ventilation slots, using a dry cloth or, in
the event of heavy soiling, a brush.
Î
Carefully clean the cutting blade with a resin sol-
vent after each use.
Î
After using the hedge trimmer, spray the cutting
blade and the saw for the power-cutting function
with maintenance oil to ensure a long service life.
Where possible, use an environmentally-friendly
lubricant.
Î
Do not oil the hedge trimmer during use.
Î
To oil the hedge trimmer, place it on its side and
apply a thin oil film to the cutting blade.
Î
During extended periods of hedge cutting, interrupt
your work frequently to oil the hedge trimmer
cutting blade.
Attention!
Do not clean the device with water.
Transport and storage
WARNING!
Risk of injuries due to the cutting tool.
¾
Before transport or storage, switch off
the device and wait until the cutting tool
comes to a standstill.
¾
Remove the power pack before trans-
porting or storing the device.
Storage
Î
Clean your device thoroughly at the end of every
season.
Î
Always store the device in a dry and safe location
that is inaccessible to children.
Î
Store the power pack and hedge trimmer sepa-
rately.
Î
Store the power pack in a cool and dry location.
Recommended storage temperature 0 - 23°C.
Î
Keep the hedge trimmer and especially its plastic
components away from brake fluids, petrol,
mineral oil containing products, penetrating oils
etc. They contain chemical substances that can
damage, attack or destroy the plastic components
of the hedge trimmer.
Î
Fertilizers and other garden chemicals contain
substances that may have a highly corrosive effect
on the metal parts of the hedge trimmer. Therefore
do not store your hedge trimmer in the vicinity of
these substances.