8
For edging (when using
the line head cutting
attachment with EZ-
Link™ models), lock the
release button of the
cutting attachment into
the
90° edging hole
(Fig. 18).
OPERATING THE EZ-LINk™ SYSTEM
The EZ-Link™ system enables the use of these optional Add-Ons:
Mach 4® Trimmer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .AF720
Articulating Hedge Trimmer . . . . . . . . . . . . . . . . . . . . . AH720*
Brushcutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BC720*
Bladed Pruner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BP720
Blower Trimmer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BT720*
Blower Vacuum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BV720
Garden Cultivator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GC720
Lawn Dethatcher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .LD720
Lawn Edger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LE720*
Pole Saw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PS720
Straight Shaft Trimmer . . . . . . . . . . . . . . . . . . . . . . . . . . SS725
Snow Thrower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ST720
Turbo Blower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TB720
*
Do NOT use this add-on with an electric powered
product.
Removing the Add-On
1. Turn the knob counterclockwise to loosen (Fig. 16).
2. Press and hold the release button (Fig. 16).
Fig. 16
EZ-Link™ Coupler
Release Button
Guide Recess
Knob
Primary Hole
Upper Shaft Housing
EZ-Link™ Coupler
2. While firmly holding the add-on, push it straight into the EZ-
Link™ coupler (Fig. 17).
NOTE:
Aligning the release button with the guide recess will
help installation (Fig. 16).
3. Turn the knob clockwise to tighten (Fig. 18).
Fig. 17
Fig. 18
Knob
Lower Shaft Housing
Release Button
90˚ Edging Hole
(Trimmer Only)
ASSEMBLY INSTRUCTIONS
3. While firmly holding the upper shaft housing, pull the cutting
attachment or add-on straight out of the EZ-Link™ coupler
(Fig. 17).
Installing the Add-On
NOTE:
Place the unit on the ground or on a work bench to
make add-on installation or removal easier.
1.
Turn knob counterclockwise to loosen (Fig. 16).
CAUTION:
Add-ons are to be used in the
primary hole only. Using the wrong hole could lead
to personal injury or damage to the unit.
CAUTION:
Lock the release button in the
primary hole and securely tighten the knob before
operating this unit.
WARNING:
To avoid serious personal injury and
damage to the unit, shut the unit off before
removing or installing add-ons.
WARNING:
When using any add-on, read and
understand that add-on’s specific manual before
you begin operation. Follow all applicable safety
information.