background image

The limited warranty set forth below is given by Cub Cadet LLC 

with respect to new merchandise purchased and used in the United 

States, its possessions and territories, and by MTD Products Limited 

with respect to new merchandise purchased and used in Canada 

and/or its territories and possessions.
This warranty is in addition to any applicable emissions warranty 

provided with your product.
For non-commercial use: Cub Cadet warrants this product 

(excluding 

Normal Wear Parts and the Auger Gearbox

, as described 

below) against defects in material and workmanship for a period of 

three (3) years from the date of original retail purchase or lease. 

For commercial uses and applications: Cub Cadet warrants this 

product (excluding 

Normal Wear Parts and the Auger Gearbox

, as 

described below) against defects in material and workmanship for 

a period of one (1) year from the date of original retail purchase or 

lease.
“Cub Cadet” will, at its option, repair or replace, free of charge, 

any part found to be defective in materials or workmanship.  

This limited warranty shall only apply if this product has been 

operated and maintained in accordance with the Operator’s 

Manual furnished with the product, and has not been subject to 

misuse, abuse, neglect, accident, improper maintenance, alteration, 

vandalism, theft, fire, water, or damage because of other peril or 

natural disaster.  Damage resulting from the installation or use 

of any part, accessory or attachment not approved by Cub Cadet  

for use with the product(s) covered by this manual will void your 

warranty as to any resulting damage.

Normal Wear Parts

 are warranted to be free from defects in material 

and workmanship for a period of thirty (30) days from the date of 

purchase. Normal wear parts include, but are not limited to items 

such as: belts, skid shoes, shave plates, blades, debris collection 

bags, wheels and tires.

Auger Gearbox 

— Cub Cadet warrants the auger gearbox (on three-

stage snow thrower models 

only

) against defects in material and 

workmanship for a period of five (5) years, commencing on the date 

of the snow thrower’s original purchase.

HOW TO OBTAIN SERVICE:

  Warranty service is available, WITH 

PROOF OF PURCHASE, through your local authorized service dealer. 

To locate the dealer in your area:

In the U.S.A.

To locate the dealer in your area, check your Yellow Pages, or 

contact Cub Cadet LLC at P.O. Box 361131, Cleveland, Ohio 44136-

0019, or call 1-877-282-8684,  or log on to our Web site at www.

cubcadet.com.

In Canada

Contact MTD Products Limited, Kitchener, ON N2G 4J1, or call 

1-800-668-1238 or log on to our Web site at www.mtdcanada.com.

This limited warranty does 

not

 provide coverage in the following 

cases:

a. 

Routine maintenance items such as lubricants, filters, blade 

sharpening, tune-ups, brake adjustments, clutch adjustments, 

deck adjustments, and normal deterioration of the exterior 

finish due to use or exposure.

b. 

Log splitter pumps, valves, and cylinders have a separate one 

year warranty.

c. 

Cub Cadet does not extend any warranty for products sold 

or exported outside of the United States and/or Canada, and 

their respective possessions and territories, except those 

sold through Cub Cadet’s authorized channels of export 

distribution.

d. 

Replacement parts that are not genuine Cub Cadet parts.

e. 

Service completed by someone other than an authorized 

service dealer.

f. 

Transportation charges and service calls.

No implied warranty, including any implied warranty of 

merchantability of fitness for a particular purpose, applies 

after the applicable period of express written warranty above 

as to the parts as identified. No other express warranty, 

whether written or oral, except as mentioned above, given by 

any person or entity, including a dealer or retailer, with respect 

to any product, shall bind Cub Cadet.  During the period of the 

warranty, the exclusive remedy is repair or replacement of the 

product as set forth above.
The provisions as set forth in this warranty provide the sole 

and exclusive remedy arising from the sale.  Cub Cadet shall 

not be liable for incidental or consequential loss or damage 

including, without limitation, expenses incurred for substitute 

or replacement lawn care services or for rental expenses to 

temporarily replace a warranted product.

Some states do not allow the exclusion or limitation of incidental 

or consequential damages, or limitations on how long an implied 

warranty lasts, so the above exclusions or limitations may not apply 

to you.
In no event shall recovery of any kind be greater than the amount 

of the purchase price of the product sold.  

Alteration of safety 

features of the product shall void this warranty.

  You assume 

the risk and liability for loss, damage, or injury to you and your 

property and/or to others and their property arising out of the 

misuse or inability to use the product.
This limited warranty shall not extend to anyone other than the 

original purchaser or to the person for whom it was purchased as a 

gift.

HOW STATE LAW RELATES TO THIS WARRANTY:

  This limited 

warranty gives you specific legal rights, and you may also have 

other rights that vary in different jurisdictions.

IMPORTANT:

  Owner must present Original Proof of Purchase to 

obtain warranty coverage.

    Cub Cadet LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019; Phone: 1-877-282-8684

          MTD Canada Limited - KITCHENER, ON N2G 4J1; Phone 1-800-668-1238

GDOC-100160 REV. C

CUB CADET LLC

MANUFACTURER’S LIMITED WARRANTY FOR SNOW THROWERS, LOG SPLITTERS 

CHIPPER-SHREDDERS, CHIPPER-SHREDDER VACUUMS AND JET SWEEPS

Содержание 3X 24





























Отзывы: