background image

♦♦♦

2

English

D. The other areas:  Please select a power cord suitable to the local

power system and power outlet.

Usually a suitable power cord is provided by the manufacturer, while
this product is sold. However, this product is sometimes, resold or
transported to another area of different power system and safety
requirements, please pay attention to the selection of a suitable power
cord.

The plug on the power cord is intended to serve as the disconnect
device, the socket-outlet shall be installed near the equipment and
shall be easily accessible.

9.

Do not allow anything to rest on the power cord.  Do not locate this
product where persons will walk on the cord.

10. Never push objects of any kind into this product through cabinet slots

as they may touch dangerous voltage points or short out parts that
could result in a risk of fire or electric shock. Never spill liquid of
any kind on the product.

11. Do not attempt to service this product yourself, as opening or removing

covers may expose you to dangerous voltage points or other risk.  Refer
all servicing to service personnel.

12. Unplug this product from the wall outlet and refer servicing to

qualified service personnel under the following conditions.

A. When the power cord or plug is damaged or frayed.

B. If liquid has been spilled into the product.

C. If the product has been exposed to rain or water.

D. If the product does not operate normally, when the operating

instructions are followed, adjust only those controls that are covered
by the operating instructions since improper adjustment of other
controls may result in damage and will often require extensive
work by a qualified technician to restore the product to normal
operation.

E. If the product has been dropped or the cabinet has been damaged.

F. If the product exhibits a distinct change in performance, indicating

a need for service.

Содержание VL950















Отзывы: