CTS FOS-3114 Series, Руководство пользователя

Страница: 9 / 31

Introduction
Publication date: October. 15, 2019
Revision 1.2
5
1.3 Front & Rear Panels
1.3.1 Front Panel
The interfaces on the front panel of the Managed Switch are described below:
1. 14 x 100/1000Base-X SFP ports (Ports 1-14):

Uplink Ports: Ports 13-14.
2. Reset Button:

Press the reset button for 5~10 seconds, then release it to restart the system.

Press the reset button for more than 10 seconds, then release it to reset the
Managed Switch. The settings will be back to the factory defaults and restart the
system.
3. Console Port:

An asynchronous serial console port supports the RS-232 electrical specification.
The console port can be used to manage the device, and the serial console port
settings should be configured as 9600, N, 8, 1.
4. Digital Input (Dry Contact):

A voltage-free connector that is used to decide whether the trigger occurs or not by
detecting its open/close status. The configuration is as follows:
- Open: Logic Level 0
- Close: Logic Level 1
1
2
3
4
1
5
Figure 1-1. FOS-3114 Managed Switch Front Panel
5