Track Hanger
GARAGE DOOR WITH TORSION SPRING
OWNER'S MANUAL
IF YOU HAVE ANY PROBLEMS WITH THIS PRODUCT, PLEASE CALL CUSTOMER
SERVICE TOLL FREE: 1-866-231-8893 (MONDAY - FRIDAY 8:30 AM - 5:00 PM EST).
BEFORE RETURNING THE PRODUCT TO THE STORE, PLEASE CALL OUR
CUSTOMER SERVICE.
IMPORTANT SAFETY INDUSTRUCTIONS
WARNING: Read all instructions and warnings before use.
Failure to follow all instructions may result in serious personal injury or product damage.
SAVE THESE INSTRUCTIONS FOR FUTURE USE.
STEP 1 -THINGS TO KNOW BEFORE YOU BEGIN
*Keep in mind when planning the installation that the garage will be open and unsecured when
assembling the new door.
*If the garage door is the only opening in the structure, make sure everything you need is inside.
You will have no way of leaving the garage until the track is assembled and installed. This will take
approximately 5 hours.
* An assistant may be required for lifting the unsprung door. It can weight from 30- 100 kg.
*You have the right tools and reasonable mechanical aptitude or experience.
'lc"fools needed
Locking pliers, Hammer, Screwdriver, Tape measure Level, Socket wrench kit, Drill, Step ladder,
Hacksaw T-square, 2 sawhorse
*Additional Material required(if necessary)
Light house hold oil, stop molding, wood block, Rope
Bottom bracket
Tubulor shaft
Torsion spring
Center hinge
Door panel
CTM International Hardware Inc.
1
Bearing bracket
Track bracket
Flag bracket
Side hinge
Jamb bracket
