CTC Union SHDTU03-ET10R, Руководство пользователя

Страница: 78 / 90

Chapter 8. Configuration Commands
8-14
To activate the VLAN function, move the cursor “ >> “ to mode and press enter. The products
support two types of VLAN, 802.11Q and Port-Based. The IEEE 802.1Q defines the operation of
VLAN bridges that permit the definition, operation, and administration of VLAN topologies within a
bridged LAN infrastructure. Port-Based VLANs are VLANs where the packet forwarding decision
is based on the destination MAC address and its associated port.
802.11Q VLAN
Follow the steps to configure 802.11Q VLAN.
----------------------------------------------------------------------
Command: setup vlan active <Disable|80 21Q|Port>
Message: Please input the following information.
Trigger VLAN function (Tab select) <Disable>: 8021Q
----------------------------------------------------------------------
To modify the VLAN rule, move the cursor “ >> “ to modify and press enter.
----------------------------------------------------------------------
Command: setup vlan modify <1~8> <1~4094> <string>
Message: Please input the following information.
Rule entry index <1~8>: 1
VLAN ID (Enter for default) <1>: 10
VLAN port status (Enter for default): 11001
----------------------------------------------------------------------
For each VLAN, VLAN ID is a unique number in the range 1~4095.
VLAN port status is a 5-digit binary number whose bit-1 location indicates the VLAN port
membership in which 4MSBs and 1MSB represents LAN ports and WAN port, respectively. For
example: the above setting means that the VID 20 member port includes LAN1, LAN2 and WAN.
The member ports are tagged members. Use PVID command to change the member port to
untagged members