CTC Union SHDTU03-ET10R, Руководство пользователя

Страница: 17 / 90

Chapter 2. Configuration
2-1
2
2
.
.
1
1
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
a
a
t
t
i
i
o
o
n
n
o
o
f
f
t
t
h
h
e
e
R
R
o
o
u
u
t
t
e
e
r
r
This guide is designed to lead users through Web Configuration of
SHDTU03/ET10R Router in the easiest and quickest way possible. Please
follow the instructions carefully.
Note: There are three methods to configure the router: serial console, Telnet
and Web Browser. Only one configuration application is used to
setup the Router at any given time. Users have to choose one
method to configure it.
For Web configuration, you can skip to step 3.
For Serial Console Configuration, you can skips step 1 and 3.
Step 1: Check the Ethernet Adapter in PC or NB
Make sure that Ethernet Adapter had been installed in PC or NB used for
configuration of the router. TCP/IP protocol is necessary for web
configuration, so please confirm that the TCP/IP protocol has been installed.
Step 2: Check the Terminal Access Program
For Serial Console and Telnet Configuration, users need to setup the
terminal access program with VT100 terminal emulation. If your PC or
Notebook uses MS-Windows®, it is recommended that the Hyper
Terminal™ Program be utilized for terminal configuration.
Step 3: Check the Web Browser in PC or NB
For Web Configuration, the PC or NB must have installed a Web Browser
such as IE or Netscape.
Note: The Browser must support "Frames". Therefore it is recommended
that for Web configuration the browsers IE5.0, Netscape 6.0 or
above and 800x600 resolutions or above be used.