G.shdsl Router User Manual
Operation Interface
For serial console and Telnet management, the ROUTER implements two operational interfaces:
command line interface (CLI) and menu driven interface. The CLI mode provides users a simple
interface, which is better for working with script file. The menu driven interface is a user-friendly
interface to general operations. The command syntax for CLI is the same as that of the menu
driven interface. The only difference is that the menu driven interface shows you all of available
commands for you to select. You don’t need to remember the command syntax and save your
time on typing the whole command line.
The following figure gives you an example of the menu driven interface. In the menu, you scroll
up/down by pressing key I / K, select one command by key L, and go back to a higher level of
menu by key J. For example, to show the system information, just logon to the ROUTER, move
down the cursor by pressing key K twice and select “show” command by key L, you shall see a
submenu and select “system” command in this submenu, then the system will show you the
general information.
71
