I-DSL64 USER’S MANUAL
12
3.3
Clock Mode
The
I-DSL64
provides three options for system clock sources:
Loop timing
Internal timing
External timing: From Data interface (G64KC)
Note 1: Clock mode can only be configured when the system in the LT mode.
Note 2: When the system in the LT mode, it can be configured only as internal or external
timing.(G64KC)
Note 3: When the system in the NT mode, loop timing is fixed.
Step 1
Enter ”DEVICE CONFIGURATION” screen, then press (Enter)
DEVICE
CONFIGURATION
Step 2
Use
(
Left arrow) or
(
Right arrow) to choose ”CHANGE SETUP”,
then press (Enter) .
CHANGE
SETUP
Step 3
Use
(
Left arrow) or
(
Right arrow) to choose ”CLOCK SOURCE”
screen, then press (Enter) .
*CHANGE SETUP*
CLOCK SOURCE
Step 4
Use
(
Left arrow) or
(
Right arrow) to choose ”INT” for internal
timing or G64KC for external timing, then press (Enter) .
* CLOCK SOURCE *
INT G64KC
Step 5
The LCD will show one of the following messages to indicate
successful completion.
* CLOCK SOURCE *
INTERNAL
* CLOCK SOURCE *
FROM G64KC
