3
E
. 0
4.
20
00
•
G
. 2
6.
03
.1
8
Overview
Overview
General information
The installation of an oil-fired system must conform to extensive regulations and requirements. It is there-
fore the duty of the installer to be familiar with all applicable regulations and requirements. Installation, star-
tup and maintenance must be performed with utmost care. Fuel oil type EL to DIN 51603 must be used.
The burner must not be operated in rooms with high levels of air humidity (laundry rooms), dust or corrosive
vapours.
Caution !
Improper installation, adjustment, modification, operation or maintenance may result in
physical injury or damage to property/equipment.
Read the instructions prior to use.
This product must be installed in conformity with the valid regulations (e. g. DIN-VDE,
DIN-DVGW).
The design and degree of protection of the burner make it suitable for operation in enclosed rooms.
Manually operated shut-off valve
Before the burner or typically means a manually operated shut-off valve for separating the burner must be
installed. It must be easily accessible.
Filter and venting device
Upstream of the burner, a filter must be installed to prevent the ingress of foreign matter. To vent the fuel
feed line proper facilities shall be provided.
Checking scope of delivery and connection data
Before installing the oil burner please check the items supplied for completeness.
Items supplied:
Burner, fastening unit, separate operating instructions, technical information, flange gasket, one 7-pin and
one 4-pin plug-type connector (for version -Z and -ZS only).
Oil jets are not included in the standard specifications.
Operating instructions
The operating instructions together with this technical information leaflet must be displayed in a clearly vi-
sible position in the boiler room. It is essential to write the address of the nearest customer service centre
in the operating instructions.
Instruction of operating personnel
Faults are often caused by operator error. The operating personnel must be properly instructed in how the
burner works. In the event of recurring faults, Customer Service should be notified.
