8
CHAPTER 1
INTRODUCTION
CHAPTER 1. INTRODUCTION
1.1 Welcome
Thank you for choosing FRM220-MX210 Gigabit Ethernet Multiplexer. Throughout this document, this model will
be referred to as FRM220-MX210 or in an abbreviated form as just MX210. If you would like to skip right to the
installation of the multiplexer, proceed to Chapter 2.
This manual is used to explain the hardware installation procedures and operation of
MX210, and present its
capabilities and specifications. This manual is divided into 3 chapters, the Introduction, Installation and Web Based
Provisioning chapters. Installers should carefully read Chapter 1 & 2, Introduction and Installation. For Operating
Personnel who would like to use Web Based Management, go to Chapter 3 for detailed descriptions.
1.2 Product Description
FRM220-MX210 is a four-port Gigabit Ethernet Multiplexer which is able to aggregate two wire-speed Gigabit
Ethernet services into one 2.5G uplink. The multiplexer can function as a media converter for transporting 2 Gigabit
Ethernet over one fiber in point-to-point topology. This multiplexer also equips advanced OSI Layer 2 switch
technologies including jumbo frame support, tag based VLAN, port trunking, fiber redundancy, 802.1D Spanning Tree
Protocol, 802.3x Flow Control and ingress/egress bandwidth control per port. With its own embedded 32 bit processor,
MX210 supports stand-alone management via IP (Telnet, SNMP & HTTP) or in-band management via 802.3ah-OAM
protocol when connected to another MX210 in point to point or as a CPE device mounted in FRM220 or FRM220A
managed media converter rack.
1.3 Product Specifications
Optical Interface
Connector
SFP cage x 2
Data rate
100M/1000M/2.5G (Manual setting)
Duplex mode
Full duplex
Electrical Interface
Connector
SFP cage x1; UTP port x 1
Data rate
UTP 10M/100M/1000M (auto or forced)
SFP 100M/1000M
Duplex mode
Full or Half Duplex (RJ-45)
Cable
10Base-T Cat. 3,4,5,5e UTP
100Base-TX Cat. 5, 5e or higher
1000Base-T Cat 5, 5e, 6 or higher
Standards
IEEE802.3, 802.3u, 802.3z, 802.3ab, 802.3ah
802.3x, 802.1W, 802.1p, 802.1Q, RFC 4330 (SNTP)
Maximum MTU
9K bytes
Indicators
PWR, Link (Port 1, Port 2, Port 3), Link/Speed (UTP port)
Power
Input
12VDC
Consumption
<10W
Dimensions
155 x 88 x 23mm (D x W x H)
Weight
120g
Temperature
0°C
~
50°C (Operating), -10°C
~
70°C (Storage)
Humidity
5%
~
90% non-condensing
Certification
CE, FCC, RoHS Compliant
Содержание FRM220-MX210 series
Страница 1: ...1 FRM220 MX210 Series 2 Gigabit Ethernet Multiplexer ...
Страница 172: ......
Страница 173: ......