CTC Union FRM220-CCF20, Руководство пользователя

Страница: 14 / 17

- 11 -
w w w . C T C U . c o m
<1> Device Active: Enable or disable the device. When disabled, all LED
indicators will be turned off except the power LED indicator.
<2>
Device Reset: This will cause the soft reboot of the device and
parameters settings in NVR to be reloaded.
<3>
Factory Default: Restores all settings to factory default. The save
operation must still be performed.
<4>
Input Debounce: When enabled, the device can stabilize bouncing
situations when power signals are rising and falling constantly.
Upgrading
Stand-alone Firmware Upgrading via Xmodem
The FRM220-CCF40 card may be firmware upgraded using XMODEM
when placed in the chassis such as CH02M. The user may use serial
terminal such as a notebook computer that has an RS232 port or via a
commonly available USB to RS232 adapter. Then, use a serial terminal that
can support XMODEM such as TeraTerm to start Firmware upgrade
process.
Quick Procedure
1. In the Main Menu, Key in
“U” to enter Firmware upgrade page. Then,
Key in
“1” to start uploading Firmware.