CTC Union FRM220-CCF20, Руководство пользователя

Страница: 11 / 17

- 8 -
w w w . C T C U . c o m
Channel Information And Configuration
The table displayed in the upper part of the screen shows the current status
of channel 1~4 Input & Output. Once the status of channel 1~4 has been
changed, real-time status information will be shown here.
<1>
Channel 01: Select 1 to set up how relay of Channel 01 is controlled.
Three methods are provided. One is "By Input" which means the relay is
triggered by actual input signals. "Force On" is to put the Channel 01 in
shorted state no matter whether there is actual input or not. "Force Off" is to
turn off the channel 01.
<2>
Channel 02: Select 2 to set up how relay of Channel 02 is controlled.
Three methods are provided. One is "By Input" which means the relay is
triggered by actual input signals. "Force On" is to put the Channel 02 in
shorted state no matter whether there is actual input or not. "Force Off" is to
turn off the channel 02.
<3>
Channel 03: Select 3 to set up how relay of Channel 03 is controlled.
Three methods are provided. One is "By Input" which means the relay is
triggered by actual input signals. "Force On" is to put the Channel 03 in
shorted state no matter whether there is actual input or not. "Force Off" is to
turn off the channel 03.
<4>
Channel 04: Select 4 to set up how relay of Channel 04 is controlled.
Three methods are provided. One is "By Input" which means the relay is
triggered by actual input signals. "Force On" is to put the Channel 04 in
shorted state no matter whether there is actual input or not. "Force Off" is to
turn off the channel 04.
<< Channel 1 ~ 4 Information And Configuration >>
+----+------------+------------+ +----+------------+------------+
| CH | Input (DI) | Output (K) | | CH | Input (DI) | Output (K) |
+----+------------+------------+ +----+------------+------------+
| 1 | Active | Non Active | | 3 | Active | Non Active |
| 2 | Active | Non Active | | 4 | Active | Non Active |
+----+------------+------------+ +----+------------+------------+
< Configuration > Relay Control
<1> Channel 01 [By Input ] <3> Channel 03 [By Input ]
<2> Channel 02 [By Input ] <4> Channel 04 [By Input ]
[ESC] Go to previous menu.