CTC Union FMUX03, Руководство по эксплуатации

Страница: 9 / 50

FMUX03
7
Chapter 2 - Installation
2-1 Description
This chapter provides the information needed to install FMUX03. It is important to
follow the installation instruction to insure normal operation of the system and also to
prevent damage due to human error.
2-2 Unpacking
If there is a possibility for future relocation of the FMUX03 unit, please save the
cartons and protection packaging material. The following items are shipped with
your FMUX03:
One FMUX03 User’s Manual
One FMUX03 Unit
Depends on what was ordered, either DB-25 wire wrapped adaptor or DB-25
Mini Terminal Block
Please carefully unpack and inspect the unit and accessories for damaged and missing
parts. Contact our nearest sales representative or our company directly if you suspect
any damaged or missing parts. Improper handling during shipment may cause early
failure.
2-3 Site Requirements
The FCC requires telecommunication equipment to withstand electrical surge that
may result from lighting strikes. FMUX03 has been tested and found to comply with
the FCC requirement. Users should follow the precaution below to insure the safety
and minimize the risk of damage to the equipment:
Make sure that the power outlet is properly grounded. Please refer to article 250
of the National Electrical Code (NEC) Handbook.
Proper grounding should include a minimum of:
1) A grounded rod buried outside the building at least 8 feet (2.44 meters) deep.
2) It is preferred that the building uses metal water pipe and cooper connector at
the joint.
2) Any device connected to FMUX03 either directly or indirectly should use the
same set of power outlet.