CTC Union FMUX03, Руководство по эксплуатации

Страница: 12 / 50

FMUX03
10
3-2 Front Panel Control and LED Indicator Functions
（
refrence appendix
）
#
Control or
LED Indicator Function
1 OLOS1
OLOS2
LSR1(OLB)
LSR2(ORB)
Red light when there is a loss of input signal
Orange light when there is a loss of output signal
Yellow light signals an alarm in Laser sending out energy
normally
When yellow light flash, there is a optical LL
When yellow light flash, there is a optical RL
2 LOS(RLB)
AIS(LLB)
Red light when there is a Loss of Signal (LOS)
Yellow light when received an Alarm Indication Signal
(AIS)
Red light flash when there is a LL of E1 signal (AIS)
3 MAJ
Red light when there is a Major Alarm present
4 MIN
Yellow light when there is a Minor Alarm present
5 RNG Red light when connected to the remote terminal.
6 SYS System normal or System failure
7 RDI Remote Defect Indication;
Indicates a failure in the remote terminal
8 LCK System Lock; Locks the system if switched to protect line 6
times within 10 minutes
9 ACO Alarm Cut Off; Yellow lights when the ACO button is
pressed to manually disable the audible alarm when a
problem occurs.
If any newer alarm is reported after the ACO button has
been pressed, the external alarm will activate again.
10 CAL Order wire
11 RST Restart the system
12 BN/BF1
BN/BF2
Expand card normal or failure
13
▼
▲
These three buttons serve as the control and configure
FMUX03