CTC Union EcoPart 425-435, Руководство по установке и обслуживанию

Страница: 16 / 48

16 CTC EcoPart i425-i435 Pro
General Information
3. Installation
This chapter is aimed at anyone responsible for one or more of the
installations required to ensure that the product works the way the property
owner wants.
Take your time going through functions and settings with the property owner
and answer any questions. Both you and the heat pump benefit from a user
who has completely understood how the system operates and should be
maintained.
The installation must be carried out in accordance with current standards
and regulations. Refer to MIS 3005 and associated building regs Part L, F
& G. The product must be connected to an expansion vessel in an open or
closed system.
Do not forget to flush the radiator system clean before
connection. Apply all the installation settings based on the description in the
chapter on “First start”.
The heat pump operates with a primary flow/return temperature across the
condenser of up to 65/58°C.
Transportation
Transport the unit to the installation site before removing the packaging.
Handle the product in the following manner:
• Forklift
• Lifting band around the pallet.
NB: Can only be used with the
packaging on.
Unpacking
Unpack the heat pump when it is placed next to its installation site. Check
that the product has not been damaged in transit. Report any transport
damage to the carrier. Also check that the delivery is complete according to
the list below.
3.1 Delivery includes
CTC EcoPart i425-i435 Pro (with CTC EcoLogic Pro Display):
• 1 x Safety valve ½" 3 bar
• 1 x Room sensor
• 3 x 22K sensor L=2500 mm
• 1 x Outdoor sensor
• 4 x Non-return valve 1¼"
• 4 x Dirt filter 1¼"
• 4 x Rubber grommet D=60
• 4 x Edge moulding 186 mm
• 2 x Edge moulding 700 mm
• CTC EcoLogic PRO/Family
CTC EcoPart 425-435 (with two CTC Basic Display units):
• 1 x Safety valve ½" 3 bar
• 4 x Non-return valve 1¼"
• 4 x Dirt filter 1¼"
• 4 x Rubber grommet D=60
• 4 x Edge moulding 186 mm
• 2 x Edge moulding 700 mm
• CTC Basic Display manual
!
The product must
be transported and
stored in an upright
position.