CTC Union Clatronic SR 7029 BT/CD, Инструкция по эксплуатации

Страница: 27 / 38

SR7028BT_CD_IM 14.09.18
27
AUX-IN Socket
For connecting to external players, e.g. MP3 player, smart-
phone, tablet PC etc.
1. Set the function switch (4) to the „CD / BT / AUX“ position.
2. Connect the external device with a 3.5 mm stereo jack
plug to the AUX-IN socket. The following will appear in
the display “ ”.
3. Start the playback of your audio source. You will hear
the sound playback from the external device through the
loudspeakers. You may use the VOLUME control (9) to
adjust the volume. The CD buttons are not functional.
4. For the remaining procedure please see the operating
instructions of the external sound source.
NOTE:
Adjust the volume of the external device to a comfortable
level.
Cleaning and Maintenance
CAUTION:
Do not immerse the device in water.
• Always remove the mains plug before cleaning the
machine.
• Any marks on the surface can be wiped off with a slightly
damp cloth without any additives.
Troubleshooting
Symptoms Course Solution
CD can not be
played back.
CD is not in-
serted or inserted
incorrectly.
Ensure that the disc
is inserted with the
label facing upwards.
Batteries too
weak.
Insert new batteries
or operate the device
with the mains lead.
CD jumps dur-
ing playback.
Check the disc
for fingerprints,
dirt or scratches.
Check the disc for
fingerprints, dirt or
scratches.
Device cannot
be operated.
The device is
blocked and
“hangs”.
Disconnect the
power supply for
5 seconds. Then
switch the device on
again.
CD / BT
playback not
available.
Audio cable
connected to the
AUX-IN socket.
Disconnect the cable
from the AUX-IN
socket.
Symptoms Course Solution
No audio
signal during
bluetooth
connection.
The device is not
registered with
the audio source.
Ensure that there is a
connection. Register
the device with the
audio source again, if
necessary.
Volume too low. Increase the volume
on the device.
Increase the volume
on the audio source.
Device can not
be connected.
Registration
does not work.
Check to see if
the audio source
supports the A2DP
protocol.
Audio source is
shut off.
Turn on the audio
source.
Bluetooth is shut
off on the audio
source.
Turn on the Bluetooth
function on the audio
source.
Bluetooth version
is not supported.
Use a different play-
back device.
Technical Data
Model:...........................................................SR 7028 BT / CD
Power supply:......................................................230 V, 50 Hz
Battery operation: ...........................6 × 1.5 V, Type UM2 / R 14
Power consumption: .......................................................13 W
Protection class: ...................................................................
Net weight: ..................................................... approx. 1.25 kg
Radio section:
Frequency ranges: ..........................FM 87.5 ~ 108.0 MHz
Bluetooth
Bluetooth support: ...........................................................V 4.2
Maximum radio-frequency power transmitted: ...........2.5 mW
Range: ....................................................... approx. 15 metres
Transmission frequency: ............................ 2.402 - 2.480 GHz
Protocols: ........................................................A2DP / AVRCP
The right to make technical and design modifications in
the course of continuous product development remains
reserved.
Notice of Directive Conformity
Hereby, CTC Clatronic International GmbH declares that the
radio equipment type SR 7028 BT / CD is in compliance with
Directive 2014 / 53 / EU.
The full text of the EU declaration of conformity is available
at the following internet address: www.sli24.de
In the “Download” area, please enter the model name
SR 7028 BT / CD.
Tested for operation in Great Britain.