CTC Union Clatronic SR 7029 BT/CD, Инструкция по эксплуатации

Страница: 25 / 38

SR7028BT_CD_IM 14.09.18
25
Scan FM Stations
1. Set the function switch (4) to the “FM“ position.
2. You can search for stations in two ways:
Automatic Station Search
Important! Previously stored radio stations will be re-
placed by new stations.
Press the PROG / MEMORY button for app. 3 seconds.
The stations are stored in ascending order of frequency.
Manual Station Selection
Use the TUNE+ / TUNE− buttons to tune to the desired
station.
Storing Stations:
1. In order to store the radio station, press the
PROG / MEMORY button. The notification will
blink in the display.
2. Use the / buttons to select the desired
memory location.
3. Press the PROG / MEMORY button. The radio station
will be stored.
Selecting Stored Radio Stations
The stored radio stations can be selected by repeatedly
pressing the / buttons.
Playing Back Music via Bluetooth
Bluetooth involves a technology for wireless radio connec-
tion of devices over a short distance. The functional radius
is limited to approx. 15 metres depending on the surround-
ings and the unit used.
In order to transfer music wirelessly, your player must sup-
port the A2DP profile ( A dvanced A udio D istribution P rofile).
To be able to remotely control the source, the playback de-
vice must support the AVRCP profile ( A udio V ideo R emote
C ontrol P rofile). Due to the different device manufacturers,
models, and software versions, a full functionality cannot be
guaranteed.
Logging on Devices (Pairing)
Before you listen to music via the unit, you must pair the
devices.
NOTE:
If an audio cable is connected to the AUX-IN socket, the
device cannot be operated in BT mode.
1. Ensure, that the Bluetooth function is activated in your
player (e. g. mobile phone). For this, refer to the opera-
tion manual of your player.
2. Select Bluetooth operation (see section “Start-up of the
Device / Introduction“ “Select the Operating Mode“).
The indicator starts flashing in the display. This
signalizes that the device is in pairing mode.
3. Choose the Bluetooth menu in your player and register
the device in your player. For this, refer to the operation
manual of your player. The device “CTC SR 7028“ will
show in your player as a selection.
NOTE:
• If the Bluetooth version of your playback device is
under V 2.1, you have to enter the password “0000”
to connect the devices.
• Only one playback device can be connected with
the device at one time. If the device is already
connected with another playback device, the device
will not appear in the BT selection menu.
If the registration has been successful, the indicator
will light up in the display. For the further procedure, please
refer to the user manual of the playback unit. If possible,
adjust the volume of the external unit to a comfortable level.
NOTE:
• Depending on the device manufacturer, you need to
perform the registration (PAIRING) again to connect
the devices.
• In case of problems with the registration of a replay
device, deactivate the WiFi-/ and mobile data function
in your playback device.
• The Bluetooth compatibility cannot be ensured for
devices (e.g. mobile phones) getting released in the
future.
• To ensure an optimal connection, make sure that the
battery of your player is completely charged.
• Some of the mobile phone brands have an ener-
gy-saving mode. Deactivate the energy-saving mode
as it can otherwise result in problems during the data
transfer through Bluetooth.
• To be able to transfer audio data, Bluetooth needs to
stay activated in your player. Observe the operation
manual of your player.
• If a mobile phone on which you are playing music
receives a call, the music will be interrupted. However,
the sound is not played back by the device. After you
have ended the call, the devices are connected to
each other again and playback continues.
Playing CDs
NOTE:
If an audio cable is connected to the AUX-IN socket, the
device cannot be operated in CD mode.
1. Set the function switch (4) to the “CD / BT / AUX“ position.
2. Open the CD compartment (3) by pulling the lid upwards
by the tab (5).
3. Insert an audio CD with the printed side facing upwards
on to the central cone so that the CD clicks into place
and then close the lid of the CD compartment.
4. The display shows “ “ and then the number of titles.
The CD will play from the first title. The elapsed playing
time and the “ ” symbol are shown in the display.