CTC Union 589610001, Руководство пользователя

Страница: 5 / 84

5
CTC VT 50 - 300
English
•
This device can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of the
device in a safe way and understand the hazards involved.
•
Children should not play with the device.
•
Cleaning and user maintenance shall not be performed by children without
supervision.
•
Installation should be carried out in accordance with the valid regulations and
according to the instructions of the manufacturer and by qualifi ed staff .
•
In a closed-circuit, pressurised system, it is obligatory to install a safety valve with a
maximum nominal pressure indicated in the technical data, preventing the pressure
in the tank from exceeding the nominal pressure by more than 0.1 MPa (1 bar).
•
The outlet of the safety valve should be installed facing downwards and in a non-
freezing area.
•
To ensure proper functioning of the safety valve, the user should perform regular
controls to remove limescale and make sure the safety valve is not blocked.
•
Do not install a stop valve between the buff er tank and the safety valve, because it
will impair the pressure protection of the buff er tank!
•
A buff er tank that is connected to the heating system increases the volume, which
has a signifi cant impact on the size of the expansion tank, which is obligatory and
the volume of which must be properly calculated by a professional.
•
If the system has to be switched off , please drain any water from the buff er tank to
prevent freezing.
•
If you are planning to build in an electric heating package, the safety of operation is
guaranteed only if an original heating package is installed.
•
Please do not try to fi x any defects of the buff er tank on your own. Call the nearest
authorised service provider.
Safety instructions
Recycling
•
Our products incorporate components that are both environmentally safe and
harmless to health, so they can be disassembled as easily as possible and recycled
once they reach their fi nal life stage.
•
Recycling of materials reduces the quantity of waste and the need for production
of raw materials (e.g. metals) which requires a substantial amount of energy
and causes release of harmful substances. Recycling procedures reduce the
consumption of natural resources, as the waste parts made of plastic and metal can
be returned to various production processes.
•
For more information on waste disposal, please visit your waste collection centre or
the store where the product was purchased.