CTC Union 588600001, Руководство по установке и обслуживанию

Страница: 2 / 36

!
1. Disconnect the cooling module’s power cable con-
nector and hoses.
2. Attach the two carrying handles to the bottom of the
cooling module.
3. Unscrew the cooling module’s screws.
4. Fold out the front cable harness and loosen the fl at
pin on the red EMC cable.
5. Pull the cooling module by fi rst lifting the front edge
slightly with the carrying handles.
6. Lift the cooling module using the carrying handles and
shoulder straps.
7. Lift the cooling module into the product using the
carrying handles and shoulder straps. Remove the
carrying handles and reconnect the power cable,
hoses and screws.
8. Before the cooling module is tightened into position,
ensure the EMC cable is affi xed.
Removing the cooling module
• Any work done on the product’s cooling system should be done by authorised personnel only.
• Close the safety switch before doing any work on the product.