Chapter 2: Introducing the PA PowerStation
Available Connectors
PA PowerStation User Guide
17
PowerStation Unit, as shown in Figure 3-1.
Figure 3-1COM2 Dip Switch Cutout and Settings
Figure 3-2 displays the settings for the COM2 port. A similar diagram
is located on the side of the PA PowerStation next to the DIP switch
cutout.
Figure 3-2Dip Switch Settings
To change the DIP switch settings, complete the following steps:
1.
Choose the appropriate DIP switch settings from the diagram
displayed on the back of the PA PowerStation or from Figure 3-2.
2.
Using a pointed instrument such as a pen or pencil, flip the
Dip Switches
Dip Switch Settings
Switch SW1
Switch SW3
•
The gray boxes represent the tip of the switch.
•
The upper half of the switch is the on position, and
the lower half of the switch is the off position.
StockCheck.com