CTC Parker Automation PC/104, Руководство по установке

Страница: 6 / 6

P1 PC/104 Cover Installation
6
CTC Parker Automation
4. Fasten a third set of the longer standoff screws onto the third PC/
104 card.
5. Remove the detachable metal side panels of the PC/104 cover, as
needed, for the connectors of the PC/104 cards to show through
the side panel.
6. Place the new PC/104 expansion cover on the backshell and align
over the PC/104 card. Make sure the non-detachable side of the
cover is facing the top of the unit.
7. Secure the PC/104 cover to the backshell using four metric 3x5
(M3x5) screws provided with the PC/104 expansion cover kit.
8. Perform any cable connections or further setup required for the
PC/104 card.
The P1 PowerStation with the expansion cover is now ready to be mounted
back in its enclosure.
Note Access to the Compact Flash (CF) card on the PowerStation is
restricted once the PC/104 expansion cover is installed on the
P1 unit. If you wish to remove or replace the CF card on the
PowerStation, the PC/104 cover may need to be removed.