CTB Chore-Time QuadRadiant, Руководство оператора

Страница: 7 / 31

4308 Quadradiant Page 7
HEATER IS SHIPPED PRE-ASSEMBLED
TOOLS REQUIRED FOR INSTALLING HEATER:
3/4” wrench for tightening gas connections.
11/16” wrench
2 Pipe wrenches
80,000 BTU High Pressure Heater
120 v
Maximum 5 PSI GAS
QUADRADIANT
QUADRADIANT
DO NOT ALLOW ANYONE WHO HAS NOT READ THESE
INSTRUCTIONS TO INSTALL, ASSEMBLE, LIGHT, ADJUST OR
OPERATE THIS HEATER.
THIS HEATER IS TO BE INSTALLED BY CERTIFIED INSTALLERS ONLY.
ONLY PERSONS WHO CAN UNDERSTAND AND FOLLOW THESE
INSTRUCTIONS SHOULD USE OR SERVICE THIS HEATER.
During normal operation, the surfaces of the unit become very hot. It is VERY IMPORTANT that the
power cords and gas supply hoses DO NOT TOUCH or REST ON ANY surface of the unit or to come
within 12” of the heater.
The area directly above the unit becomes hot during normal operation of the heater. DO NOT install
electrical wiring, water lines or conduit above the heater.
DO NOT run gas supply hoses above the heater.
WARNING:
CAUTION