CT Lab Vecto III, Руководство пользователя

Страница: 66 / 80

Vecto III User Manual
66
2. Protect the device properly and also put it inside a padded box to prevent
mechanical damage during transit.
Or
Use the CT LAB packaging in which the device was supplied.
5.3 Storage
To prevent damage to the Vecto III battery the device should always be stored in the
Powered Down state. When the device is powered down the device can be stored for
up to 5 years.
Device Power Down:
•
Hold the ON/OFF button down for 3 seconds; then
•
Switch the Power Button off with a pen or pencil. The device is powered
when the switch is in the depressed state.
Note that removing power from the device also removes power from the RTC. Upon
start-up after a power cycle the RTC is in an unknown state and the device must first
be connected to a valid time source (GPS or NTP) to ensure it time-stamps data
correctly.
5.4 Warrantee and Repair
5.4.1 Warrantee Statement
CT LAB (PTY) LTD Warrants its products and parts as set forth below. Please note that
this is only applicable if the product is bought directly from CT LAB (PTY) LTD or CT LAB
(PTY) LTD accredited resellers.
•
CT LAB (PTY) LTD warrants the Impedo DUO and Vecto III to be in compliance
with their respective specifications under normal use and service, and to be
free from material defects in materials and workmanship for a warranty
period of twelve (12) months from the date of the installation or eighteen
(18) months from the date of shipment, whichever occurs first. The warranty
period for new spare parts and components sold by CT LAB (PTY) LTD is
twelve (12) months from the date of shipment. The warranty period for
repaired or refurbished parts repaired by CT LAB (PTY) LTD is ninety (90) days
from the date of shipment, unless repaired pursuant to a warranty, in which
case the repair is warranted for the time remaining of the original warranty
period.
•
Warrantee repair: