CLOCK FUNCTION
To view the clock, simply press the SET
button. Alternatively, you can tap on the
LCD display consecutively until the clock is
shown.
PEDOMETER FUNCTION
Steps are recorded when you are wearing the pedometer and motion is detected.
The ‘STEP’ icon will start blinking when movement is detected. However, to avoid
counting accidental movement as steps and also to record “active” steps that will
improve your fitness, the counter will wait until you walk 30 steps in a continuous
motion before it begins recording the steps at 31, 32, 33 etc.
a) Step mode
Tap on the display as many times as
necessary until the top of the display
shows the word ‘STEP’. This shows the
number of steps walked since your last
reset from the tracker. It will start
counting once motion is detected.
b) Distance Mode
Tap on the display as many times as necessary until the top line of the display shows
the word ‘ML’ or ‘KM’ (Mile or Kilometer). This displays the distance walked. If you
wish to change miles / km read step 10 in the full setup section.
