32
|
Instructions for Use
Assist
X Mobil
To teach the IR code into your AAC or environment control device, you need
the IR one handset (Art #20164), the code for your device may also be available
for download (csslabs.de/download).
With the Configurator software, the IR channels can be switched (4 different
channels available) if several devices in a room want to use the IR function.
Configurator Software
The AssistX Mobile Configurator software is available at csslabs.de/download
(for Windows). You can use it to:
• Update the firmware of the transmitter, receiver and repeater
• Assign names (eg the caller) to the transmitters in the receivers
• Clone the receiver so that the configuration (transmitter names) is copied
to several receivers
• Save the receiver configuration
• Switch the IR channel at the transmitter or switch the IR function on/off
• Setting date and time
Instruction by specialist personnel is required to use the Configurator.
Please note: If you update a device, all other components of the system
(transmitters, receivers and repeaters) also need to be updated. Other-
wise, safety-critical system failures can occur!
