30
|
Instructions for Use
Assist
X Mobil
• Delete of subscribers
Go to
„Menu > Subscribers > Delete“.
You can now select subscriber to
be deleted from the subscribers list and delete them with the
[OK]
key.
If you delete a subscriber having a standard name like „Caller 4“, the re-
maining list will be shrinked. means: „Caller 3“ will be followed by „Caller
5“. A new transmitter will have the name „Caller 4“. To delete all trans-
mitters go to
„Menu > Subscribers > Delete all“
.
Set the Alarm signals of the receiver
The receiver is able to emit four different alarm signals:
Sound / Flash / Vibra-
tion / Relay (switch, toggle)
The
9
switch output can activate e.g. external call signals.
• Aktivate/deactivate Alarm signals
Go to
„Menu > Settings > Alarm Signals“.
Here the signals can be set
separately.
• Set the switch mode
Trough
„Menu > Settings > Relay Mode“ the switch mode can be set up.
Relay Mode
1x 1 sec
continious
Interval
Call repeat
Here the time can be set when a call should be triggered again if the call has
not been finally confirmed at the caller. This function cannot be deactivated
(safety function!). We strongly recommend settings to 1 min.
Note: For safety reasons we recommend in larger facilities to use two
devices for each receiver used so that one is always charged and one is
used. This guarantees the battery life for one shift.
