1-4
ProRACK 8020
Control Panel
The control panel provides reset buttons and power ON/OFF
switches for up to four segments of a segmented passive
backplane.
Each segment of a backplane can be configured with a single
board computer, creating a complete system. Depending on
your particular configuration, up to four complete systems
can be installed in the ProRACK 8020.
Be sure to record your ProRACK’s configuration, noting
which set of segment controls are assigned to which segment.
The Segment Power ON/OFF switch controls the power to
the assigned segment. The Power LED associate with the
ON/OFF switch lets you know that the segment is receiving
power from the power supply.
Each of the Dual Power Supplies provide separate ON/OFF
switches on both the front and rear panels.
The locking front door limits access to the drives and control
panel. A smoked glass cover allows you to view the LED
indicators on the control panel.
Figure 1-4: The Control Panel
Power ON/OFF
Buttons
Reset
Buttons
Segment 1
Segment 2
Segment 3
Segment 4
