31
MB-P201
Power Management Setup
This program lets you set the values for the components of
your “Green PC”. The default values are set at the factory.
The following pages provide descriptive overviews of each
option in the Power Management Setup.
ROM PCI/ISA BIOS
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
Power Management : Max Savings
PM Control by APM : Yes
Video Off Method :DPMS
Video Off After: Suspend
Modem Use IRQ : 3
Doze Mode : 1 minute
Standby Mode : 1 minute
Suspend Mode : 1 minute
HDD Power Down Mode: 1 minute
Throttle Duty Cycle: 12.5%
ZZ Active in Suspend: Disabled
VGA Active Monitor: Enabled
Soft-Off By PWR-BTTN
:
Delay 4 sec
CPUFan Off In Suspend Mode: Enab.
Resume by Ring: Enabled
IRQ8 Break Suspend: Disabled
Figure 6: Power Management Setup
Esc : Quit
: Select Item
F1 : Help
PU/PD/+/- : Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
**Reload Global Timer Events**
IRQ [3-7, 9-15], NMI: Enabled
Primary IDE 0: Disabled
Primary IDE 1: Disabled
Secondary IDE 0: Disabled
Secondary IDE 1: Disabled
Floppy Disk: Disabled
Serial Port: Enabled
Parallel Port: Enabled
